PDA

View Full Version : "tang" Circlip


Scott Tharpe
04-06-2004, 07:58 PM
Does anyone know the part # for these?
steve
04-06-2004, 09:41 PM
53-821246 and the earlier is 40-17977 both NLA. We have some if you need them.
Jay Smith
04-07-2004, 05:54 AM
Scott,

The "tang" type cir clips do not have to be used in your piston application ! Mercury , Weisco , Pro Marine , etc..... standard cir clips have worked well for us in the past with no failures even in the "tang" style pistons !

Good luck !