Help !, Merc 25 H.p., Carb Float Adjust

[DonChicho]

HI, I NEED TO ADJUST THE CARB FLOAT, ON MY MERC 25 H.P.,1993,SEA PRO, SERIE # OG009030 .

DOES SOMEBODY CAN TELL ME WHAT'S THE MEASURE BETWEEN THE CARB BASE AND THE TOP OF THE FLOAT ?

THANKS,
DON

[O/B Dude]

Since no one else is responding, I'll try to help. Keep in mind I have zero experience with 25 hp motors. The modern carbs use a float setting of zero....they are set flush to the body of the carb. I would think yours would be set the same way. The older carbs with 2 float bowls were set to extend beyond the body of the carb. Hopefully someone with a manual for your motor will jump in here.

[nickbo]

dont know if it helps but Johnson/evinrude suggest invert carb to measure and clearance between top of float and top of bowl = 1/16" for similar...