Hey you guys with 2.4 carb motors...

[Ryan140]

I run an oval port with wh22s. where should I be with jets. the jets in it now have been drilled out and #s ground off. But im too lean.

[CDave]

Don't know for sure, but to be on the safe side I'd get the biggest jets you can and go from there.

[CompKing]

Hey Ryan,
I would get rid of the drilled jets,it's not a good idea to drill fuel jets.As far as were to start,if I new that I wouldn't have over $300 in jets laying around:eek: I have wh15's and a non drilled intake and ended up with 82's with 84's in 2&5 running 1150-1200 egt.I think I will go up one size for the cooler fall weather though.I would start with 90's &92's and work your way down.

[Ryan140]

Thanks Dave. Ive got a set of 90s. I'll try those in all six. If its 1100-1200 then I'll keep them but check 2 and 5 for lean condition. I sure would like to hear from trex and what the ho2fo ended up with just to give me an idea.