Evinrude 70 /SST 60 cleaver wanted

[kellytheaker]

Anyone Got some good props for an Evinrude 70 sst60 race cleavers to be had . I understand Ron hill is still producing . I thought I read a ? Brown cut was good .
I could use some clarity on what diameter centre - A 12?
or so and around 22 - 23 diameter . Just exactly what is the best . Thanks guys

[sharpeye Mike]

Ron Hill makes several types but for me, his Jeff Brown cleaver worked really good on my Delta, Stinger 56

[David]

I had a 70 Nissan twin on a VooDoo a long time ago, and it ran better with a 23 SRX than a cleaver. I only tried on cleaver.

What gearcase do you have? Nitro 15" or regular?

[Roflhat]

https://forgemarine.com/props

[kellytheaker]

Im using an SST lower .
Im also about to get a nitro lower built . The nitro gear case is the preferred on a V hull .
thanks for the Jeff brown cut from Hill
Appreciate the Forge marine opportunity - what exactly works from them on the omc 70

[kellytheaker]

I went to Ron Hill and got a 13-23 cleaver and it will need worked to suit . Thanks
tried to get a hold of Titus - Nope

[kellytheaker]

As far as dealing with Forge marine / Scotland and then dealing with the currency - it just doesn’t make sense for me .

[Roflhat]

Fair, if you order via the website it should do all the currency etc. for you

[kellytheaker]

Fair, if you order via the website it should do all the currency etc. for you
I thought the currency exchange - shipping distance and such negated any opportunity with the thought . Then when viewing the site - all I saw were through hub opportunities in the over 19 pitch .