Galazkiewicz
09-20-2025, 03:13 PM
I recently purchased an In-Control shift/throttle combo here on S&F. It was in pretty good shape but hard to move. So I disassembled it and one of the springs was screwed up and out of its hole dragging on the mechanism. And the ball bearings fell out when I took it apart. I then took it completely apart and cleaned it getting the old grease out of it that was almost clay. I re-lubed it all up and started to put it back together but I never got a chance to see where the ball bearings were at originally and if the 2 that fell out were all that were originally in it. I can't seem to get it back together correctly. Anyone familiar with how these beautiful pieces of machinery go back together? TIA for any help.
Greg
Greg