ask me how i like my drag4 prop[test]

[KIRCHNER]

????

[skialot2]

OK. I will play along.

How do you like your drag4 prop test?

[KIRCHNER]

very impressed. out of the box, 0 cup. sent it out before i even turned it, was expecting not easy to plane like most o/v hubs. amazing i can pnane off @ 2800, never looses its hook. now a little loose in ste broke rn above 55 hit it to 70 about 5500 smooth, no vibration, like the 3 bbl. ive been top-end crazy mostly, now backing off for good economical cruise ride.im over my 5 hr breakin, just want to see if it will break my top # of 80. no prop rattle! now im at 50-1 oil, 93 pump. thanks for asking, Art.

[XstreamVking]

Gotta love a good prop...

[KIRCHNER]

you betcha..its a semi/cleaver. runs flat. very low rake. ide like to compare it to a trophy i have. ill know if i put it together right very soon

[David]

Good props and way less coin than Merc props

[whipper]

28 drag 4 was the best prop I ever ran until i tried a Drag 3. Hooked up unreal and better top end than the 4. Drags are the **** :cheers:

[KIRCHNER]

oh boy, a drag3. if i buy anymore props, ill be dead meat & living alone. NO MORE PROPS,but ill try a D3. LOL!

[KIRCHNER]

Good props and way less coin than Merc props
I paid 580$ + xcup. 700$

[LakeFever]

Where did you buy from?

[OnPad]

Hope I dont come off as a Debbie Downer, or contrarian, but this is my experience with drag props. I had a smaller diameter Signature drag 4, and have a Yamaha drag 3. Both have a lot of rake, and neither worked well on my ltv. Maybe a full size 4 blade would work, but they both seemed to slip too much for a top end prop on my setup.
I like a cleaver, or even chopper over a high rake drag.

[David]

I had a Drag 3 for my SS2000, and liked the Drag 4 better, so I sold the Drag 3. Both were Hill castings, but I don't know who finished either as I bought them used. I have a new Drag 4 finished by Billy Eaves to try.

Whipper, were yours Hill props or real Yamahas and do you know who finished them? I expect without data that if I had sent the drag 3 off for work, it would have come back better.