1987 2.0/2.4 V6 trim wires AWG?

[pcrussell50]

1) Gauge of the green, blue and black wires coming out from the trim motor and to the large posts on the solenoid
2) Gauge of the thinner wires going to the smaller (control) posts on the solenoid

Thanks

Wiring up and installing solenoids on a powerhead that had previously NOT had the solenoids on it. (Going to have to get creative because the air box does not have bosses to screw the solenoids to it).

-Peter

[pcrussell50]

Welp, in the absence of any responses, I ordered 12awg. If the stockers are 14awg, I suppose there are worse crimes than using 12awg to butt splice to them.

Soldered and heat shrink too of course.

-Peter