Vessel view to analog

[RBT]

I’m am trying to complete my boat rigging, it has a vessel view 903 and livorsi gauges.
I can’t find the part number for the harness that plugs into the system link that then has wires (grey for tach, tan for temp and brown for the trim gauge).
any help would be much appreciated

rt

[derekfl]

i am sure you found this, but... https://samerwebapp01apncus01.azureedge.net/mmgw-env-b/filer_public/3c/90/3c90cfd2-2742-4cf1-b764-8ca1cf48d69a/903_installation_instructions_8m0129930.pdf call Ken at NuWave. he will know if this is it or not. https://nuwavemarine.com/uncategorized-mercury-parts/oem-quicksilver-mercury-analog-gauge-interface-kit-892486k08/?gclid=Cj0KCQjw1rqkBhCTARIsAAHz7K3TiXxAf-Ih7qSbbe4pIwJt9J8wP-UvwsMLTRnnNYP3TSMIQ8AszowaAqqwEALw_wcB

[David]

Double R finally figured out that my Merc Monitor GPS was not working due to an incorrect cable. It had baffled me and some others for 3 years. The correct cable can be important Good luck. We are all waiting to hear how your one of one runs