View Full Version : New LS 300 Hp why is intake backwards
519952519953Seems it’s the worst for water ingestion especially if a sun pad is used and saltwater drips right on intake like this did . Also those direct injectors require you to remove the cylinder head to pound them out when corrosion rusted them off
InjectorService
06-11-2023, 09:25 AM
As far as the injectors go, have you tried something like this tool? Or don't you have access?
https://i.postimg.cc/HWKhDtn7/Screenshot-20230611-092415-Acrobat-for-Samsung.jpg (https://postimg.cc/CdGNbkjF)
derekfl
06-11-2023, 10:23 AM
i would think it is to get "carb" noise out of the passenger compartment. and a bigger "visor" over the throttle body may help. but the sun pad is not supposed to pour water on the motor. hard to blame the motor for that. mine did a zillion years ago. dripped on intake. intake gasket leak let it fill the rear cyls with water. bent a rod into an S curve.
Yes it’s a direct injector but it started missing so when it was brought in to service nothing to grab have to remove intake and heads he’ll of a annual service with engine removed
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.