Trim pump wiring need help!!

[austen2019]

So I had a 115 tower of power with dual rams and upgraded to a 200 with a single ram. I’m using my old controller and my old controller has a purple white/green / blue /black and a tan or light gray white wire. The new pump doesn’t have a spot for the purple/white wire or the gray/white wire. I don’t have a limit switch but the trim down works good and the trailer mode raises the motor good but my trim up switch doesn’t work. I can’t find any wiring diagrams that have that grey wire. Anyone know why my trim up switch isn’t working and is there a way to get it to work. Thank you

[rgsauger]

The green is for down and the blue is for up. Using a multimeter, what wire goes hot on your trim up button? Can’t help any more tonight.

[Jim Speros]

Grey is a tach lead, tan is temp. What color do you have going to trailer mode? Why not change it to trim up? In older pumps the the trim up went thru a limit switch. With No limit no need for trailer circuit.

[austen2019]

hooked up the purple wire to the blue and it all works thank you