Various 2.5 260 parts

[Markus]

Found some more parts and added to the list. If any of these prices are out of whack, just let me know!

I can bring to California on July 7 and ship the week after. (Prices exclude shipping)

New parts

Fiberglass bottom cowling made by AFR $100
Oval grommets for bottom cowling cable entry 25-817713 (tel:25-817713) $25 for 2 - sold
Decal set for front cowling 37-818956A $40

Single-stage yellow Tony Doukas fiberglass reeds $100 for 14

Cylinder head stud set $70

Head gaskets 27-822844-T05 $75 for 2
Head gaskets Pro Marine 844-1 $40 for 2 (one is opened and re-wrapped in plastic - may have been assembled and taken off)
Exhaust divider plate gasket 27-847525004 (tel:27-847525004) (have 2) $25 each
Powerhead gasket 27-8231422 (tel:27-8231422) (have 2) $40 each
Powerhead gasket Pro Marine (have 2) $30 each
Kit with reed plate gasket, air horn gasket and pressure relief gasket Pro Marine $15

Seal kit Pro Marine 10-2016-3 (tel:10-2016-3) with 3 crank shaft seals $10
Bottom crank bearing retaining ring 53-67446 (tel:53-67446) $2

Spark plugs NGK BUZHW (have 4) $5 each

Used parts

20 inch shift shaft and shift arm $100
Throttle arm including screws, cable holder, etc. $150
Anchor bracket for shift and throttle cables with the rearmost screw hole broken off $100
Flywheel $500 - sold
Switchboxes (have 2) $100 each - sold
33cc heads $250 for the pair - sold
Bottom end cap with crank seal, o-ring and bolts (have 2) $50 each
Extra o-ring $1
Mercury Mahle pistons from a 1993 2.5 260. Lightened, balanced (500g with rings) and top-pinned by John Marles. $500 for 6 - sold
Stainless steel bottom cowling plate $100
Reed blocks $300 for 5 (+1 bonus block with a crack in one corner) - sold
Jay Smith aluminum 1 inch spacer with hardware $100
Red engine vinyl cover $70

[mach351]

Markus I’ll take those switchboxes. Let me know if you want Paypal or whatever.

[oldblue82vector]

Pm sent.

[Markus]

Markus I’ll take those switchboxes. Let me know if you want Paypal or whatever.

PayPal is fine.

[Markus]

I found some gaskets hidden under a pile of Yamaha gaskets, so I listed those, too.

[mach351]

Markus clear your pms. Money sent

[Markus]

Fixed now.

[ebynus]

Sending P.M.

[16checkmate]

Pm sent on the studs

[Markus]

16checkmate: responded to PM with text message.

[Markus]

Since this old thread keeps popping back up, I updated the original post.

My next visit to the US is late October / early November, so I can bring things then.

[Markus]

Found some more 260 parts. I will head out west in a week and a half.

[Markus]

Heading out west again on Friday. If anyone needs anything, just shout out. And if prices are off, just let me know.

[ctobias1984]

can you text me a picture of the decals? 716-2551139

[Markus]

Will do when I get home tomorrow.

[Markus]

Sent as MMS

[talon25man]

Is the Stainless steel bottom cowling plate $100 still available?

[Markus]

Still available.

I can ask my parents to bring it to California in a couple of weeks and ship from there.

[younggun94]

Is the throttle and timing arm still available?

[Markus]

I’m quite sure they are. I will check this weekend.

[younggun94]

Ok let me know please

[Markus]

Yes, they are.

[younggun94]

How much are you asking

[younggun94]

And pm some pictures please

[Markus]

Heading to California on July 7.

If anyone needs anything - let me know.

[younggun94]

Still interested in the throttle and timing arm and shift linkage tray

[Markus]

Still interested in the throttle and timing arm and shift linkage tray

Not sure that pictures can be sent by PM.

I will post in this thread.

[Markus]

Photos below. Sorry for the delay.

520655

520654

[Andreas]

Looking for two 7 pedal reed blocks in very goid condition for my Pronax 225. Also the 1” spacer is for 7 pedal reeds ?

[Markus]

The spacer is for a 2.5 260.

[younggun94]

How much for the two

[Markus]

How much for the two

225 bucks. That's a 10% volume discount. :D

[Markus]

Please send me a pm with your email address, or post it here!