Water in cylinders

[PhastBoat]

After thinking my problem was Injectors i checked all injectors and tried a new ecu. same problem rough idle loads of smoke. Then by mistake in started the motor with the hose not on all the way- ran great- with no water. Took the heads and exhaust plate off and found water droplets on all pistons and carbon washed off. Exhaust plate gasket looked ok - head gaskets looked ok.
Good compression before i took apart.

BASE GASKET?

[mr.clean]

i need a break from doing nothing:o retirement sucks!

[jerry]

maybe you raced someone that was to fast ??

[Dave S]

Jerrys Littl pooch did a pee pee in your mota. :D Water in all 6 holes?:confused: How are your reeds? They can suck water if they are broke.

[Dave S]

Jerrys Littl pooch did a pee pee in your mota. :D Water in all 6 holes?:confused: How are your reeds? They can suck water if they are broke. Thats not it, water on hose is a pressure issu, must be the exhaust plate.

[Talon2.5]

water in all 6 could be a cracked exhaust plate like dave s said, i would check that first