Mystery wire

[KIRCHNER]

Heres what i got. 2.4 220 efi. starboarb side switch box, upper top right corner has a red/white hanging wire 6'' long with a butt connector end. where does it go??? its looks factory, female end. ready to power up motor.

[H2Okie]

From a diagram I have it looks like it is /was supposed to go to an "Advance module " or "Idle stabilizer module " which ever you originally had .

[KIRCHNER]

Thank you, that makes sense.i have no modules. im good to go.. for a cold start, do i keep the key depressed, or pump it some, then crank? its been a while with this motor.. also should i hear a click of sorts

[H2Okie]

If it has a stock Laser injection system A yellow / red wire connected to the starter solenoid from the key switch also runs to an input of the ECU for fuel enrichment when cranking the engine over .

[KIRCHNER]

yes it has the yellow/red connected, but a yellow/black hanging, not connected.. has stock laser inj.

[H2Okie]

With an EFI motor looks like the yellow and black wire is not used . I believe it's normally used to energize enrichment valve with a carb motor. Is it just hanging with a female bullet connector ?

[KIRCHNER]

With an EFI motor looks like the yellow and black wire is not used . I believe it's normally used to energize enrichment valve with a carb motor. Is it just hanging with a female bullet connector ? yep..

[tlwjkw]

are there 2 yellow/red on tha starter solenoid?.. with 2 yellow/reds on solenoid it squirts every time "start" is engaged... if you want to control tha enrichment with key push take tha yellow/red comin' from tha ecu and make it up to tha "extra" yellow/black stickin' outta tha boat side harness....

[KIRCHNER]

Yeah, there are 2 yellow reds. i try a cold start[as is] and see how she does. the push to richen hookup sounds more my style. im in fla, warm most of the time.. thanks for the tip.ART.