2.5 Drag egt readings.

[bohemian609]

Running a 2.5 drag with original a6 box and low compression heads. What's the best way to keep the heat at a lower temperature when cruising around 5to 6000rpms?

[tlwjkw]

you've got to CONTROL water exit...... may jus have ta do some experimentin'............

[HStream1]

The A6 has a Lean spot purposely programmed in it at 5000/6000 RPM. That is not the box you want for Cruising. Get you a 11350 digital with a A48 Chip and a 39 psi regulator Its a Drag Curve but its a richer curve all the way through the program. The A6 at 5000/6000K for extended periods of time will lean Burn your pistons.

[tlwjkw]

Running a 2.5 drag with original a6 box and low compression heads. What's the best way to keep the heat at a lower temperature when cruising around 5to 6000rpms?

guess i can't fckin' read this early in tha mornin'........................................:reddevil: