Oil delete block plug

[jaybrown]

I know this has been beat to death but can some post a pic of where they have put a block off on the side of the block where the air nipple is for the oil pump to work? I have the oil delete kit so I put the long shaft in where the oil pump was but how do I block off where the air is used to make the external tank work?

[rock]

Take out the hose barb and replace with a plug.

Rock

[Aaronhl]

What size thread is it? And who would sell the plug?

[rock]

I think it is as 1/4" pipe plug available in brass or iron at any hardware store. Remove barb and take it with you.

Rock

[jaybrown]

Yes that’s what I’m talking about, how don’t get it out? And pics of what you mean by “pipe plug”

[Aaronhl]

IF THIS IS THE CORRECT SIZE
https://www.ebay.com/itm/2PCS-1-4-Brass-BSP-BSPT-Pipe-Thread-Allen-Head-Plug-US-Stock-B182/183865796062?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3Dd5eb2 ad44dd446e1b9ee63533ab1c0dc%26pid%3D100675%26rk%3D1%26rkt%3D15%26sd%3D183865796062%26itm%3D183865796 062%26pmt%3D0%26noa%3D1%26pg%3D2380057&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3A05e3e688-3277-11ea-b823-74dbd180c7b1%7Cparentrq%3A87b448c016f0a4eaa9e67c50ff77d838%7Ciid%3A1

[jaybrown]

Ok thanks now I see what you mean how do I get old barbed out? Will it pinch if I try and unscrew it with vide grips?

[Aaronhl]

use an adjustable wrench

[rock]

Use a deep well socket or open end wrench.

Rock

[jaybrown]

ok thanks

[half fast]

9/16 deep well socket takes it out . If your motor is an efi I can give you the merc part number to block off where the oil line enters the vst tank .

[jaybrown]

Not efi,1989 black max