New 300R on a customers 2013 Liberator

[WILDMAN]

I just got done removing a 300xs from this 2013 21 Liberator that I originally built. I just got done hanging a new 300R. The customer is very excited about the new power.

[JPEROG]

He should cut you another check and take the truck as well. They match nicely- There are suddenly going to be a lot of fast 21s running around.

Joe

[WILDMAN]

Yeah, it's from Jacksonville


He should cut you another check and take the truck as well. They match nicely- There are suddenly going to be a lot of fast 21s running around.

Joe

[JPEROG]

I know, I am going to have to upgrade my old junk to keep up with the local traffic. I am getting surrounded by 300Rs and the 450s are starting creep in as well.

Joe

[eli]

We ain’t scared up here in the north ,too many pontoons that go fast plugging up the lakes leave the boat in the garage lol

[CUDA]

Soo how much faster and does it feel different with the extra weight?

[WILDMAN]

It ran 100 with the 300xs. I ran it today but motor was too high. (2.5") It would overheat and shut down after about 2/3 mile. Still ran 112 though. The extra 55 lbs makes no difference. Same as 8 gallons of gas




https://apis.mail.yahoo.com/ws/v3/mailboxes/@.id==VjN-JWcQ-RzvnPAwpONAXwCMfeyFoMGqvVeBKUDg-QzSyDY6XTJ5m0B6xYlTf-CHiebPwMXn0xY3wy9h56LWuJrXbw/messages/@.id==AJrg7NkKm5JOXUR_vwmweM6ZxVQ/content/parts/@.id==2/thumbnail?appId=YMailNorrin&downloadWhenThumbnailFails=true&pid=2

[David]

How high did you run the 300XS?

[mjw930]

And what prop? My guess is a 15.5 x 34P Hill 5 blade.

[WILDMAN]

The 300xs is set at 1.25" above the bottom. 300R is 2.25" above. For top end I run a 15.25 x 34" Hill 5 blade cleaver. 112-113 at 6300 rpm. 4% slip.

[mjw930]

15.25 x 3” ? I assume you meant 34” :) Very nice.