kyja95
05-06-2019, 01:15 PM
Hi Guys, i've been making these billet Ti throttle clips and offering them for sale on facebook and i figured here would be a good place to post them as well.
Developed for bridgeport, 260, 280, and drag. (will work with any v6 merc though) on o-ring heads you may have to flatten casting area next to head bolt to be able sit flush and protrude from the side of head properly.
Selling them for $35 ea. clip and return spring, and there is a discount on an order of 4 or more.
it replaces one of the lower head bolt washers on the port side. spring will work hooked on throttle adjustment screw or on factory throttle arm clip for factory return spring.
a few pics (quick test fit on a bad block i have)
contact thru email [email protected], or pm
Thanks guys!
Developed for bridgeport, 260, 280, and drag. (will work with any v6 merc though) on o-ring heads you may have to flatten casting area next to head bolt to be able sit flush and protrude from the side of head properly.
Selling them for $35 ea. clip and return spring, and there is a discount on an order of 4 or more.
it replaces one of the lower head bolt washers on the port side. spring will work hooked on throttle adjustment screw or on factory throttle arm clip for factory return spring.
a few pics (quick test fit on a bad block i have)
contact thru email [email protected], or pm
Thanks guys!