** Ultra Clean Mercury Mod VP 2.4 Low Hours **

[blewbyyou]

Ultra clean Mercury Mod VP!! 2.4L! Super low hours ONLY 144 Original hours! 185 psi on all 6 cylinders. Motor runs perfect! Has only had Sunoco 114 octane fuel and Mercury Quicksilver Synthetic 2 Stroke Oil it's whole life! Perfect for a repower or if you just want to Scream and Fly!! Asking $3,500 or best offer! Will include 3 blade Mercury 26 labbed prop and 10" Manual jack plate with full asking price!! Pm with any questions and all offers!!

[Baker343]

113mph with a 2.4 Modvp. That speed is hard to achieve, must be a really light hull.

[jjamieson7284]

Did I read 185 correctly

[blewbyyou]

Did I read 185 correctly



Yes the VP s are high compression motors. Hence the reason the run on minuim 100 octane. I think stock was around 195psi.

[FUJIMO]

learn somethin new every day.

[Baker343]

Yes the VP s are high compression motors. Hence the reason the run on minuim 100 octane. I think stock was around 195psi.

Help me help you

[blewbyyou]

Help me help you

LMFAO! Do your homework kid!

have the older Mod VP with Oval Ports and stuff. My block is a bit different than yours too and runs at 195psi's But your people say its not a bridgeport. But when you read this brochure This is a Mod Vp motor as well and its not a bridgeport buy yet it says it has bridgeports. But yet they don't classify it as a bridgeport. I find that interesting.

[Tomanytoys]

What year?
whats the S\N?

[RONNIE]

113mph with a 2.4 Modvp. That speed is hard to achieve, must be a really light hull.
right exaggerated claims dont make for good sales

[SUNKIST]

we all want to see your compression readings.

[hondatech]

we all want to see your compression readings.
Going to be low at cranking speed due to cam duration overlap on hipo cams

[Gianeskis]

Going to be low at cranking speed due to cam duration overlap on hipo cams

So this ModV is really a Bridgeport with a hi-po camshaft in it...Wow..I'm going to leave that alone..lol.but I will say this and any Merc 2.4 I've ever seen have flat top pistons in them making the combustion chamber size determine the cylinder pressure...What size cc combustion chamber heads are on this engine ?

[RBT]

If it’s unmolsted it’s an 1987 ish based on the gear case. True mod-vp motors were oval port motors. The cowling not saying “Bridgeport” is correct. 185 psi is about right.

[Krazymaan]

BBY, you are correct. 26cc heads brings that oval port right up to 195 psi. Mine has seen 120 plus mph.
Plus these power heads are really light.

428945

[blewbyyou]

$$$$$ Sold!!!!!! Thanks Scream and Fly!!!! $$$$$$$