PDA

View Full Version : Stv procomp set up



Ap.cola.stv
09-12-2018, 08:25 PM
Need some help guys looking for some advice. I have a stv pro comp with the Sprint bottom and I'm currently running a Merc 260 with cle case an no setback. What hight, what prop do you think. An should I be running setback if so how much. Thanks for any and all information.

JPEROG
09-12-2018, 08:50 PM
Assuming its not a real light boat, I ran my pro-comp at 1 1/2 above the bottom "make sure you still have good water pressure and temps.", and the best all around lake prop for me was a 30 ET.

Joe

Ap.cola.stv
09-12-2018, 10:26 PM
Thanks Joe. Was you running any setback if so how much?

Ap.cola.stv
09-12-2018, 10:27 PM
Also what kind of numbers were you getting with your setup?

JPEROG
09-12-2018, 10:34 PM
It was on the transom and would run 105 at 7600. It had tight heads but was pretty much stock other then that. I have 8 inches of setback on my current river rocket with a 3L and runs pretty good as well.

Joe

Ap.cola.stv
09-12-2018, 11:16 PM
Thanks for the info I'm on the hunt for props, trying to find some close to my area hoping to be able to try before I buy