How to wire the fuel pump to the kill switch .

[Jeff "Yammer"]

I want to hook up my fuel pump to my kill switch . I've done this before but I now forget **** .
My kill switch just grounds out the ign. does it not . I have a complete curcit when it is pulled and no resistance when the landyerd is in place .

Thanks.

[Rickracer]

....it will have 4 contacts, two ar normally open, two are normally closed. Use one set to ground the mag(N.O.), and the other (N.C.) to operate the fuel pump relay.

[Tom D.]

If you only have 3 connectors on the switch use OHM meter to check which is NO(norally open) and which is NC(normally closed). Connection 2(or middle connector) goes to ground. Connector 1 we'll call NO will go to kill wire to kill ignition. Connector 3 will be NC connect the negitive of your electric fuel pump ot here. Hope this helps!

Tom