Main Jets for OMC Carbs????????????

[95RapidRiot]

Does anyone know if jets bigger than 81 D can be bought for my carbs? I need 90 D and bigger! I am not talking about drilled out jets. I have heard drilled out jets may or may not have the right flow characteristics? If no one makes these large size jets who does the best job of drilling them out with the right specs? I am in the process of tunning my V6 Evinrude with a Wayne Taylor front half and mid section. The exhaust has been relieved a whole bunch! Any help would be appreciated greatly!!!!!!!!!! THANKS!!!!:p :p :p

[aircraftman]

do not drill them out you can never be sure what they are then. unless you have a flow bench for them.

[95RapidRiot]

What other option do I have?:confused:

[Cp]

....you shuld be able to get the jets you need from either Jeff Baker at Baker Marine in Antioch, IL or Al Stoker at John's Custom Marine in Stanton, CA.

Cp

[95RapidRiot]

THANKS!!!

[aircraftman]

Phone: 847-838-0066
baker marine support.

also www.scaryfast.com

[95RapidRiot]

I called and got great help! THANKS!!!:D