View Full Version : Mercury Tech 2.4 200 got me stumped
custom1skier
06-12-2018, 08:44 PM
I've gone through my fuel system and still having an issue getting out of the hole under load or pulling a skier. Rpms will go up about 500 and drop a couple hounderd while I have my foot in it. It's like I just let off the gass and got back in it, kinda like blower surge... I'm thinking it has to do with ignition system now. This only occurs up to around 2500-3000 rpm. Any ideas what to look for?
custom1skier
06-12-2018, 08:58 PM
You can hear it pretty good in this clip
https://m.facebook.com/story.php?story_fbid=2134738536541841&id=100000171453064
Hit the choke when taking off Check primer ball sometimes they plug up
custom1skier
06-13-2018, 08:57 PM
Hit the choke when taking off Check primer ball sometimes they plug up
Prime ball is good. What will hitting the choke do for this?
If it's lean the choke will pick it up if it makes it worse then spark is weak may need new motor harness or hi speed circuit in stator is having a issue
custom1skier
06-13-2018, 09:33 PM
Ok I'll give it a shot next time out
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.