Trim Actuators - Stainless - Pair

[MIKEF18]

1 stainless trim actuator remaining, I bought these from a member here for my 15" motors and never got around to using them. all sold

[Noah Burns]

400 for the pair?

[MIKEF18]

yes

[resqu-u]

Fair price but FYI, they are 20” mid actuators, not 15”.

[MIKEF18]

I think the way this pin is attached it will work on 15" and 20". The last picture shows it mounted on a 15"

[graynester]

yeah that right but that is very creative on mounting it to a 15 and I give him kudos for that. very nice

[lcfishing13]

I have a 2001 200xs 20" with single Ram. Will this fit that? If so will your break up the pair?

[Worm 27]

MikeF18 if your willing to break them I'm willing to buy the other set for my 15" mid...located in South Louisiana...contact me if interested 9853003zero8seven

[MIKEF18]

I have a 2001 200xs 20" with single Ram. Will this fit that? If so will your break up the pair?

As long as the clamp bracket is the same as what I have pictured it will work (which I think it is). I think you have to drill and tap for the 2 small bolts that hold the angle bracket with the pin. Look at the last picture and you can see those 2 bolts underneath. I never got around to mounting these, the picture of it mounted is from the person I bought them from.

I will break them.

[lcfishing13]

As long as the clamp bracket is the same as what I have pictured it will work (which I think it is). I think you have to drill and tap for the 2 small bolts that hold the angle bracket with the pin. Look at the last picture and you can see those 2 bolts underneath. I never got around to mounting these, the picture of it mounted is from the person I bought them from.

I will break them.

Here is my Mid - Appears to have a few holes already drilled on the Right side... HMMM I maybe able to make this work. Let me look further at it after my meeting this AM and I will get back to you.

406864406865

[lcfishing13]

My angle bracket pin is predrilled already. Looks to be different. Anyone a bit more familiar want to chime in and tell me if this will work for my application?




As long as the clamp bracket is the same as what I have pictured it will work (which I think it is). I think you have to drill and tap for the 2 small bolts that hold the angle bracket with the pin. Look at the last picture and you can see those 2 bolts underneath. I never got around to mounting these, the picture of it mounted is from the person I bought them from.

I will break them.

[MIKEF18]

you would have to mount it like it is in my last picture, both parts have slotted holes for adjustment. It is a custom pin mount that you would have to drill and mount.

[vnemous]

406930

[MIKEF18]

that pin bracket would need to be purchased or made separately for Icfishing13's application, that is not the pin mounting bracket I have.

[vnemous]

It's called a Z bracket. I got mine from Chaz be makes them.

[MIKEF18]

One sold! One remaining.

[MIKEF18]

PM me if you are interested in this.

[MIKEF18]

new price $120 shipped

[Greg G]

new price $120 shipped

I will take it Mike, please PM me when you get a moment

[MIKEF18]

sold, thanks SNF & Greg G