PDA

View Full Version : RX4 propeller



David
03-20-2018, 08:03 PM
Does anyone have experience with the RX4 prop? We get a prop with our new 150HO. It's going on a lightweight outboard ski boat

thanks

David
03-22-2018, 08:29 PM
I will find out about the RX4. We get a 'free' prop with the new 150HO and chose a 22" RX4. J Craft recommends a 4 blade and the RX4 seemed the best choice from the BRP website. I also ordered a used 22" Raker from this board. Should have results by July.

derpid
03-27-2018, 04:41 PM
ran one on mine and I did not like it. Good holeshot, but holy hell did I get a good amount of prop walk when I jacked it up. I preferred the raker over the rx4. ended up settling on a scorpion.

David
05-15-2018, 07:58 PM
Well that didn't work at all. Crappy hole shot and only 52 mph. I got 52 with a 115HO, so the 150HO should be better. And it is. 19" Viper, great hole shot and 56 on the limiter. I still have to try the 22 Raker.

derpid
06-22-2018, 04:55 PM
if you can get your hands on a scorpion, or maybe its called the S3 (from solas) id give it a wirl. 15" diameter and rake off the charts. it may spin you down a little as they tend to behave 1-2* taller.