water leaking ProMax

[Tiller]

I just pulled the powerhead+ exh. plate on a 225 ProMax to replace the tuner, When I cranked the engine to check for leaks, I found water leaking around the upper mounts on front. I used new Merc. gaskets, they matched perfectly. It runs 5PSI idle-20 PSI at WOT. Do I need thicker gaskets with the solid mounts or just don't worry about it?:rolleyes:

[Stv Euro]

When this was done on my motor I know the merc gaskets were put back and also high heat silicone was added for backup! No leaks!!