New 24 Twister 4 SEATER from Finland

[Z06man]

NEW WIDEBODY 24 Twister built in Finland . Bought a new DW 28 FAT CAT and need more room. Boat went to Jack at Full Throttle to be painted WHITE down to the bottom and gel work cleaned up on GRAY bottom right out of the container , the boats have poor finish from factory. It has STV side console and carbon fiber seats, windscreen and carbon fiber Bob's jackplate . Stainless marine trim Indicator and jack plate indicator .Custom made All Aboard Ladder that is removable . Has a rear hatch to make it a 2 or 4 person side by side.It sits on a very nice custom built aluminum trailer with brakes and a retractable tongue . These boats are raced in class C-3 in Europe and run 110 with 2 on board with 200XS with 300xs 125+. 62,000.00 Rigged. .Also have 2005 300X with 34 HOURS with option of new sportmaster never run or a used Blueprinted one with low water pick up blocked for transom pick up. 14k only for sale with boat.

[dogeatdog]

Is this the widebody like Adams?

[JPEROG]

Is this the widebody like Adams?

It is-

Joe

[dogeatdog]

It is-

Joe

Just talked with Adam, he confirmed it also. Thanks!

[bogiesworld]

Pm sent

[TheDude]

Is the boat still for sale? If so, what’s the asking price?

[Ospreyproduction]

I should buy this. Really....I should buy this.

[WILDMAN]

Lee, you know you will NEVER buy a NEW boat!



I should buy this. Really....I should buy this.

[Ospreyproduction]

Lee, you know you will NEVER buy a NEW boat!

Technically, it's second hand. :thumbsup:

[csorensen]

Any trade interests? Have a 2005 Talon with 525 EFI and XR Integrated Steering.

Thanks,
[email protected]

[Z06man]

Love the Talons but have no room for more.

[talon94]

do you have the weight of the hull....

[Z06man]

840lbs

[talon94]

that's a lot of boat for 840 lbs.

[home made tunnel]

that's a lot of boat for 840 lbs.

That's why they do 125+ with a 300hp @ 24 foot!

[Capt.Insane-o]

I often ask myself, a nine year relationship, or this boat?

[Hoovershark]

The boat all day every time....

[Hoovershark]

Is the boat still available? Tried to PM you.

[JPEROG]

I think he is going to keep it. At least until his 28 is painted and rigged.

Joe

[Hoovershark]

Well, not sure if he ever rigged it or did anything, but the value to me is in the virgin state. So I guess keep us posted Joe.

Thanks,

Brian

[Z06man]

Rigging it .

[warren]

I knew it superstar.bad mofo/rocket out

[baja1000]

how much for boat and trailer

[NateTheGreat]

Tried to PM you but ur box is full
Are u open to offers? Have u done anything with the project? Do u have interior pics

[JPEROG]

He has it almost completed. I don't think its going anywhere soon.

Joe

[aggiestckl]

Did this get finished? Is it for sale?

[JPEROG]

Did this get finished? Is it for sale?

Almost and no- He is waiting for his injectors to come back and it will be ready to fire. The boat turned out really well thanks to Jack (it was a mess when it first got here).

Joe

[JOSEPH SHULMAN]

Lot ta eyes on that boat!

[aggiestckl]

Any photos?

[Z06man]

I will get some more pictures shortly hope to have it running right after I get back from the loto. Have rigged the entire boat with the weld Mount system a little expensive but have not not put any screw holes in the boat.

[Z06man]

I will be testing a new HYDRIVE Heavy Duty front mount on the 24 TWISTER from Finland after initial testing. It has 3 bolts going into tiller arm 2 horizontal and 1 vertical , then the arm attachment has 1 arp bolt in a collar and then strapped to another 1/2 inch bolt. the arm has a welded 1/2 stud on the cylinder which is solid STAINLESS STEEL OR BRASS WITH CHROME PLATE and I have been told less play than Seastar or Uflex. It is also totally isolated at every point with Delron bushings so no electrolysis. This is more money than Seastar but may be an alternative to Side Ram for some. Another nice feature is the Helm looks very nice can be rear mounted at any depth or front mount and has cc options of 28 OR 35 and if you use there Power assist up to 80cc. I will have some special pricing on The Power steering and helm combo and SS front ram soon.

[RUM RUNNER 305]

I will get some more pictures shortly hope to have it running right after I get back from the loto. Have rigged the entire boat with the weld Mount system a little expensive but have not not put any screw holes in the boat.

Where do you get the weld mounts?

Thanks Justin'

[Z06man]

I get mine from Fisheries supply even though they are on the west coast items arrive faster than from Jamestown dist.. Plus they stock more of the hard to get female stud mounts. The bad other than cost is the 8040 2 part mix has a short shelf life but I keep it in beer fridge and it doubles the life. Joe Patterson has helped me out over the phone a couple of times on special orders . It is rare to get decent service on the phone any [email protected]

[Z06man]

Order plenty of the little tips 1.50 or less each . Only good once but keeps you from having to plan the layout in advance .

[warren]

Nothing but bad ass but look who we r talking about.o super star/ can u say shoot out lotto style

[wculver]

Saw this boat at Silver Glenn today - Very nice !

[JPEROG]

417248417251417519

Paul took his time and is continuing to make it a really nice rig-300X with 33 original hours on it "minty"

Joe

[BaxterPointYachtClub]

Beautiful boat, thanks joe for the update!

[JOSEPH SHULMAN]

Beautiful boat, thanks joe for the update!


Lets see it aired out.

[HammerMX]

Saw this boat at Silver Glenn today - Very nice !

We saw it sitting on the trailer waiting to get wet off of Blue Canal! Great looking boat, someone thought it looked like a Talon from behind, but upon a side view it was very unique!

Did the boat like the rough water on Lake George?

HammerMX

[bohemian609]

can you show the dash layout and seats?

[Z06man]

Still a lot more to finish but wanted to get boat wet.It loved Lk George easy 80's in the lake and it wanted more.

[Austintatious]

Still a lot more to finish but wanted to get boat wet.It loved Lk George easy 80's in the lake and it wanted more.

Still forsale?

[JPEROG]

Still forsale?

I think you would have to really want it bad $. The process that he went through to get the boat to the states, body worked, trailer made, rigged etc would wear an average guy out. The boat is fast as hell and looks great-

Joe

[aggiestckl]

Looks like he updated price yesterday

[baja200merk]

422977

It looks like a 40ft cat coming down the river. Badass and Paul rigged it with the best of the best.

[NICE PAIR]

422977

It looks like a 40ft cat coming down the river. Badass and Paul rigged it with the best of the best.

Maybe 42' :thumbsup:

423109

[wculver]

Guys I have the 23 Argo for sale on here if anyone interested in this style of boat. Thanks, Ward

[whipper]

Ya WOW i would have a hard time selling that knowing its next to impossible to do better in looks and performance in that size. So sweet!

[Z06man]

The Twister runs fantastic and is not for Sale . I think the Argo is off the market as well .

[CUDA]

I'll splash one for you;):cheers: they look FUN