View Full Version : WTB a 21ft pickle fork with outboard mooring cover
peter rosetta
11-09-2017, 08:04 PM
Need a mooring cover for a 21ft pickle fork boat for eliminator or cougar type. 860 212 1690
91eagle
11-10-2017, 01:29 AM
Give us a call A1 upholstery and canvas 423-438-5999
Hydrogasm
11-10-2017, 08:34 AM
Need a mooring cover for a 21ft pickle fork boat for eliminator or cougar type. 860 212 1690
If you are not looking for a custom fit cover, I used one for a pontoon boat for my Cougar 22MTR. The pontoon covers are flat in the front, so they work well for the pickle forks. For a 21MTR, I would look for a cover for a 22-23' pontoon boat. Do a search on eBay and they run $80-200.
Thanks
Gary
peter rosetta
11-10-2017, 12:30 PM
Thank you very much I am going to look into it.
Hydrogasm
11-10-2017, 10:23 PM
I have attached some I took of my 22MTR with a cover for a 26' pontoon boat on using a support system I made out of 2" ABS pipe. It took a little work but it stops the water from pooling and dripping through. I made one for my Malibu Response and the boat sat out side all winter with the cover on and it dry as a bone inside in the spring when I took the cover off. I always take the snow off it though. The cover lasts 2-3 years, then you get a new one.
Thanks
Gary
TNRoostertail
11-11-2017, 02:41 AM
Give us a call A1 upholstery and canvas 423-438-5999
I highly recommend these guys. They fixed my floor and did a complete carpet job on my old bass boat and it looks great. Easy to work with and very reasonable.
peter rosetta
11-11-2017, 04:23 PM
Thanks. That's good to here.
Powered by vBulletin® Version 4.2.3 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.