Mercury Racing 15 x 30 labbed 3 blade cleavers - RH & LH

[alamodan]

A pair of 15 x 30 labbed 3 blade Mercury Racing Cleavers. Less than 10 hours run time - like new.

Part# 48-19519A71 FSITS and 48-19520A71 CSITS. The props MSRP for $1500 ea - Jaco sells them for $1119 each.

Questions call Dan at 510-329-6320 or [email protected]
390309390310390311390312390314390315

MY ERROR ON DESCRIPTION - I WILL RELIST THE PROPS WITH THE PROPER DESCRIPTION AND REVISED PRICE.

THIS LISTING IS VOID.

[kct11]

Those are not labbed, they are stock (pro finish).

[alamodan]

I called Mercury Marine today and asked them for information - gave them the part #'s and the serial #'s on the props. They told me they were labbed propellers. The finish is polished.
Are they incorrect?

[kct11]

The last letter of five on the prop will be L for labbed or S for stock (pro finish). You can also tell by how thick they are, a labbed prop will be quite a bit thinner and very sharp. Labbed props are most often left un polished.

[kct11]

The A or L in the part number is what to look for.
Yours has the A for pro finish. 390336390337

[alamodan]

thanks for the info -

[4Speed]

I am interested in the Right if someone is interested in the Left.

[4Speed]

I looked at my Lightning ET that I purchased new from Mercury via BBlades and it says on the box "Lab Finished" and the 5th digit is a L. I don't think that would make it a labbed propeller would it?

[kct11]

The last letter of a Merc stamping is L or S, designating lab or stock.

[alamodan]

This listing is void - props are not labbed - i will relist with the correct description and revise the price.