Fogging a 225 Promax

[David]

The season is almost done. What is the best way to fog a 225 Promax? Thanks

[Dave Strong]

I just run mine on a remote tank with 32:1 oil mix, pull the plus and spray the fogging oil, drain the vst, new water separating filter, grease, and change the gear lube.

Dave

[tux974]

X2 what Dave said!
What I also like to do is remove the spin filter/separator empty half of it fill it with Mystery Marvel then run the fogging cycle.

[phillnjack]

I know its not a mercury, but the E-tec motors just shoot loads of extra 2 stroke oil into the motor to winterise it.
would this not be the best thing for other motors too ?

[David]

I have an Etec as well and the winterizing is a breeze. On earlier motors I used to spray fog into the carbs before shutting down for the winter. I can skip that.

[Dave Strong]

Unless you have a SVS intake it's impossible to fog through the intake. The rich oil mix gets a good coating of oil on the bearings and fogging through the spark plug holes coats the piston, rings and cylinders.


Dave