Custom power trim hose maker?

[Tom Smyth]

Need to have some custom hoses built for inline power trim. Anyone dealt with someone before that doesn't use the Huge 3/4 inch or bigger hose to make these? with the 3/16 male inverted flare fittings?

Local hydraulic shops here in BFE florida look at me like I got three eyes...

thanks

[SS170]

The problem with the inline trim hoses is the cylinder end. They have that little "kick" or bend in them to clear the bracket. Local shops around here just shook their head. I was stuck going the Sierra route.

[stokernick]

Hoser , Billy Moreland, Moreland Hose, Long Island!!

[Tom Smyth]

Not looking for the funky straight end on the cylinder, just someone who can make small diameter hoses with the right size flare fitting

[FUJIMO]

Don't know exactly which inline trim set-up your using Tom, but as mentioned, if your going with the "standard" inline trim cylinders arrangement...then yes, Sierra makes direct replacement black trim hoses, as would have come on the motor when new. Part number 18-2110 http://www.atlanticmarinedepot.com/images/18-2110.jpg

[FUJIMO]

They also offer the above in stainless steel braided lines(sierra). If you are after S.S. braided lines that are custom lengths for any other trim set-up, any good hydraulic hose shop that makes up lines can do it. If one end, or both ends have a 90 or a 45 on them, they will ask you how you want them indexed, compared to the opposite end. This does not matter at all, if they are really long though. It also does not matter, if there is a straight on one end. I know your in an out of the way town, but the next closest larger city to you should have a hydraulic hose shop. Orlando? If not, we have many down here in south florida. Hydraulic Supply in Ft. Lauderdale makes thousands of them for instance. I have spent hundreds of thousands $$ there over the years. Latham Marine is one street away & buys all there fittings & hoses there, for instance. Yachting capital of the world. There are many other places down this way as well.

[Markus]

Talk to Hoser, as stokernick says.

[FUJIMO]

www.Hydraulic-Supply.com They are all over Florida

[Tom Smyth]

yes I have been on their website. I will get in touch with them. thanks everyone.

[mrcrsr]

I was just in hydraulic supply yesterday. I have to go back next Thursday. If there is anything I can do to help let me know. They have sst fittings and stainless Teflon lined hose

[FUJIMO]

Which location do you drive to Charlie?

[mrcrsr]

Riviera Beach. That place is amazing, has everything I've ever needed

[dwilfong]

where you located at?

[mrcrsr]

Port st Lucie

[Tom Smyth]

Not everything you ever needed. They do not carry or deal with the 3/16" inverted flare male fitting i need for one of the hoses. No one i haved talked to handles the at all.

[JPEROG]

Central Hydraulic in Daytona has them. I just bought 6 of them for 3 sets of hoses. They have several locations but I don't know how far South they are.

Joe

[SS170]

http://www.hydraulicsdirect.com/ They have 1/4 hose to 3/16 inverted flare. Part # MIX-04-03. About $9 ea.

[SS170]

http://www.hydraulicsdirect.com/SAE-45-Inverted-Flare-Male-Swivel-Hose-fittings-p/mix.htm

[vnemous]

If you had called Hoser (Moreland Hose) they would have been in the mail already:D

[Tom Smyth]

I NEED STAINLESS STEEL. I can find them all day long in carbon steel.......

[Tom Smyth]

http://www.hydraulicsdirect.com/ They have 1/4 hose to 3/16 inverted flare. Part # MIX-04-03. About $9 ea.

Not in stainless only carbon steel

[Tom Smyth]

Central Hydraulic in Daytona has them. I just bought 6 of them for 3 sets of hoses. They have several locations but I don't know how far South they are.

Joe

spent two hours TODAY with Central hydraulics in Cocoa FLA and they do not carry them in stainless steel.

[vnemous]

HOSER HAS THEM:D 516 485 9898 ask for Billy

[Tom Smyth]

will do tomorrow
thanks

[Tom Smyth]

If you had called Hoser (Moreland Hose) they would have been in the mail already:D

Spoke with Billy two days ago. He is working the issue. He has no right off the shelf answer yet.

Stainless is the big problem. working to find out who made the fittings for mercury.

[vnemous]

Yes a good guy that Hoser

[Markus]

Yes a good guy that Hoser

A good guy indeed. Particularly when it comes to hoses.