Powertech Thrust washer help please

[whipper]

Tryed this washer they send with the new tro4 powetech and it doesn't fit. The lip on the inside rubs on the seal and with the prop on there's a little tiny bit of spline showing. Anyone know what thrust washer works for a 15 spine small shaft torque master case and a powertech prop with the
Cushion lock hub? This is the washer sent with prop that doesn't fit.382228 382229 382230382229

[whipper]

Need a washer to fit into the hub then I can use a reg merc thrust washer it seem.

[whipper]

What farce new prop and no one knows what this washer or even if one is a ailable for these. Hear a day of vacation running around I won't get back.��

[XstreamVking]

Thats a yami style thrust washer. Supposed to have a thick washer on the nut side also and a cotter pin thru the nut.

[XstreamVking]

You can grind the lip off the back and use a washer under the bending lock washer and lock nut.

[whipper]

Thanks ya I new it was messed up. Its actually an evanrude Johnson washer powertech said today.there sending me the right one asap should have it by Wed to fit the TM. Lol I was even pretty specific but guess it happens.:D