lwilde.0422
05-31-2017, 10:57 PM
.530" Thick 6061 Aluminum
Top Plate: 18.5" x 3.5" x 1/2"
Bottom Plate: 16" x 4" x 1/2"
Weight is exact same on both plates at 1433 grams or 3.1lbs.
These are larger than anyother support available. They aren't cheap but neither is your transom or the $10-$30k, 600lb motor bouncing around off the back.
$165 shipped (includes both the upper and lower)
+$30 if you want the 4 thick lathed SS washers
**Indicate with or without drain plug cut in top plate**
Your transom will thank you, I promise :thumbsup:
p.m. if interested :cheers:
376427
376422
376403
376404
376405
376402
376420
376421
Top Plate: 18.5" x 3.5" x 1/2"
Bottom Plate: 16" x 4" x 1/2"
Weight is exact same on both plates at 1433 grams or 3.1lbs.
These are larger than anyother support available. They aren't cheap but neither is your transom or the $10-$30k, 600lb motor bouncing around off the back.
$165 shipped (includes both the upper and lower)
+$30 if you want the 4 thick lathed SS washers
**Indicate with or without drain plug cut in top plate**
Your transom will thank you, I promise :thumbsup:
p.m. if interested :cheers:
376427
376422
376403
376404
376405
376402
376420
376421