PDA

View Full Version : Installing 2.5 Lightweight Cowl


ProComp
04-17-2003, 01:29 PM
On a 2.4 200 fishing motor. Will this work? Concerned because the plate in the bottom of the pan has rectangular exhaust openings suitable for a 2.5. Does it matter or will the gaskets seal it up anyway.

Thanks

ProComp
vector mike
04-17-2003, 02:56 PM
My 2.4 200 and my Bridgeport both have rectangle holes.
ProComp
04-17-2003, 03:13 PM
Aren't the opening on the 2.5 pan larger than the powerhead and midsection exhaust openings? I believe they are. Therefore, will everything seal together?

ProComp
AnthonySS
04-17-2003, 03:16 PM
You need to check out with Mark Casper...he can fill you in on all the details of that installation cause ther are some issues
STVBOY
04-17-2003, 06:11 PM
I had a 2.4 with a 2.5 light weight cowling and it sealed up fine because there is a gasket on top and below the pan. I do believe the openings in the pan were bigger than the motor and the adapter.
VectorPat
04-17-2003, 08:15 PM
I have a 2.4 with a 2.5 cowling and no problems here either..
ProComp
04-18-2003, 02:31 AM
All I needed to know is it will work.

ProComp
Jeff "Yammer"
04-18-2003, 11:12 AM
Brad ,

That would make a good article for us . Take some pic's . How's your weather .......... been hot here and then the next day snow ?
??????????????????????????

Jeff
ProComp
04-18-2003, 11:22 AM
Woke up to 6" of snow the other day just after it had all dried up here nicely. Suppose to be 15C today. Crazy. Still 2ft of ice at the lake but that is OK because my STV is probably in as many pieces as yours. I'll try to come up with something interesting for the next Rooster Tail. Talk to ya later.

ProComp