loop
10-15-2016, 01:30 PM
Was purchased from a very reputable member here who said it was worked by DAH for a Bullet boat. I have no way to confirm this but it does have The DAH stamps on the hub. I have owned the prop about 3 yrs and rarely use it.
I will conservatively rate it a 7 only because of 3 small flaws that ive tried to show in the pics.
#1The worst by far is an area about 3/4" long on the leading edge on one of the blades. its about 1.5 inches out from the hub. would be a very easy fix for just about any prop shop but I dont believe it has any effect on performance.
#2 is a very small ding on the leading edge of the same blade just before where the cup starts. another easy fix or just leave it
#3 is what I'm 99% sure is a small casting flaw about 1/16" dia. on the back side of the same blade. easy to fix or leave it
i will try to get a better pic of the leading edge damage. camera didnt want to focus
I will conservatively rate it a 7 only because of 3 small flaws that ive tried to show in the pics.
#1The worst by far is an area about 3/4" long on the leading edge on one of the blades. its about 1.5 inches out from the hub. would be a very easy fix for just about any prop shop but I dont believe it has any effect on performance.
#2 is a very small ding on the leading edge of the same blade just before where the cup starts. another easy fix or just leave it
#3 is what I'm 99% sure is a small casting flaw about 1/16" dia. on the back side of the same blade. easy to fix or leave it
i will try to get a better pic of the leading edge damage. camera didnt want to focus