Merc tuner question

[Keaten]

I've got a bridgeport that's been running nicely around 7000 rpm on a stock 2.0 150 tuner and stock undrilled mid...wat kind or would any top end be gained if I changed the tuner and mod the mid... itsgot a lot of low end like it is... just would like to learn as much as I can thanks..

[tux974]

Drilling the can/mid will not do anything but give you some noise and depending on the adapter plate for a little, if any up top you can install an early 2.5 245/260 tuner. Your low end may suffer a little and do not expect miracles up top. Not sure unless you like or want noise it would be worth the work or changes....JMPO.

[Dave Strong]

Are you running the Bridgeport 1 piece exhaust plate?

Dave

[Keaten]

Running 2 piece adapter and poppet valve and stats

[Dave Strong]

Running 2 piece adapter and poppet valve and stats

Don't think you will gain much. If you port match the plate and go to a 200 or 225 Pro Max tuner might see some gains. Pretty sure a 245 or 260 tuner will not fit in the liner but could be wrong.

Dave