26p Trophy Plus

[87starflite]

26p trophy plus is excellent condition 9/10. Has the slightest mark on the edge of one blade and is most likely a manufacturing flaw. Prop was never run aground, pics below show the mark. $400 plus shipping
http://i229.photobucket.com/albums/ee275/ebatson88/20160905_191830.jpg (http://s229.photobucket.com/user/ebatson88/media/20160905_191830.jpg.html)
http://i229.photobucket.com/albums/ee275/ebatson88/20160905_191942.jpg (http://s229.photobucket.com/user/ebatson88/media/20160905_191942.jpg.html)
http://i229.photobucket.com/albums/ee275/ebatson88/20160905_191856.jpg (http://s229.photobucket.com/user/ebatson88/media/20160905_191856.jpg.html)

[282]

What did you run this on?

[87starflite]

Ran this on a 21 foot shadow( same as superboat,challenger). This was my spare prop and i barely use it. Has maybe been in the water 10 times in 6 years

[luv4streams]

Ran this on a 21 foot shadow( same as superboat,challenger). This was my spare prop and i barely use it. Has maybe been in the water 10 times in 6 years
Do you know the diameter of your prop

[87starflite]

All trophy's are 13 and 3/4

[tb2054]

I have a 21 checkmate pulsar w/a 2005 250 sx any thoughts of how it might work !!!

[tux974]

If you can get the rpm's out of it, I see no reason why not, it should run well on your 21 with the 3.0L.
The 26 ran extremely well on my 21 RS when I had the the single 300PM. That and the 26 ProET were my wheels of choice! Very nice wheel for a good price GLWS!

[282]

I have a 21 checkmate pulsar w/a 2005 250 sx any thoughts of how it might work !!!

I have a 21 Checkmate Starliner with a 250 pro xs on it, I was wondering he same thing

[vnemous]

I have a 21 Checkmate Starliner with a 250 pro xs on it, I was wondering he same thing

Vic I have a 25 you can try, not have or buy, than if it works and you need a little more pitch buy this from Eric. He is a good kid and you can count on it being a good wheel. Let me know.

[282]

Thanks, I have run the fury in a 24 and 25, just wondering what a 4 blade would do. I will call you.

[87starflite]

I ran this prop on my 21 starflite and my 21 shadow and was able to spin it with a carb 225 3.0 at around 5800. The shadow was eventually repowered with a 250 and i was able to spin this prop right where it needed to be with promax ecu at around 63 to 6400 rpm. I then put a 300x on thr boat and this prop became too small. Trophys are a decent running prop and i got good speed out of them, liked the bite of the et blades better and that was mostly what i ran. This prop has little time on it

[airyz93]

I ran this prop on my 21 starflite and my 21 shadow and was able to spin it with a carb 225 3.0 at around 5800. The shadow was eventually repowered with a 250 and i was able to spin this prop right where it needed to be with promax ecu at around 63 to 6400 rpm. I then put a 300x on thr boat and this prop became too small. Trophys are a decent running prop and i got good speed out of them, liked the bite of the et blades better and that was mostly what i ran. This prop has little time on it
I have a 21 Apache with the 2014 250 pro xs on it how do you think it would work? I ran a trophy 24P labbed wasn't enough prop.

[87starflite]

I have a 21 Apache with the 2014 250 pro xs on it how do you think it would work? I ran a trophy 24P labbed wasn't enough prop.

What type of speed did you see with the 24 and at what rpm? A 26 with a 250 on an apache would be a good starting point depending how low your motor is. What lower unt and what gears do you run?

[vnemous]

I have a 21 Apache with the 2014 250 pro xs on it how do you think it would work? I ran a trophy 24P labbed wasn't enough prop.
If you mean wasnt enought cause it was bumping the rev limit the 26p should lower your rpms by about 400 rpm and put you right in the sweet spot

[airyz93]

What type of speed did you see with the 24 and at what rpm? A 26 with a 250 on an apache would be a good starting point depending how low your motor is. What lower unt and what gears do you run?
72 mph at 6000 RPM. Running a torque master 20" gears 1:75:1 about 2 inches below the pad.

[87starflite]

You should be able to swing this prop with no issue if you get your motor up at-least another inch. If you can swing this prop to 6000 with similar slip numbers to what you had you will definitely pick up 3-5 mph

[airyz93]

Venomous/87Starflite, Thank you for sharing your experience!

87starflite, sent you a PM.