Cowling Rig Tube Fittings???

[DragRacer9506]

Hi all. I have a lightweight Mariner cowl and the openings on the pan for the rigging are oval shape. Does anyone know where I can find the fittings that allow me to run the round rig tubes without having to stuff them in the pan? Thanks in advance

[R.grover]

the member on here Lightspeed did do them, not sure if hes still around

[Double Rigged]

Lightspeed is the man. He is on OSO also. They are stainless steel. Very nice. Have bought them before. They are for the 2" hose that works with the anodized ones.

[jsnvulcan13]

I used a piece of pvc along with a rubber cap and a hose clamp. I notched the end of the pvc to fit thru the oval hole on the pan and used the rubber cap on the inside to hold the pvc in place. I then cut a hole in the cap to allow the rigging to rigging thru. The hose slides right over the pvc and the cap on the inside is black so you can't even tell that it's pvc.

Jason H.

[DragRacer9506]

Thank you all!!! I'm gonna look him up, I may even do that PVC idea, that's pretty clever

[AZMIDLYF]

Scroll down to bottom right of page:
http://www.wickedpowerboats.com/parts.html

[jsnvulcan13]

Scroll down to bottom right of page:
http://www.wickedpowerboats.com/parts.html

Nice

[JPEROG]

I just got some from Todd D. and you will have them next day. He is in Naples-

Joe