I/O leak

[delawarerick]

I was heading to the keys run and the trailer axle on the project boat broke so luckily I didn't take the donzi so today I decided to take the donzi out locally well the bilge come on after running a while open the hatch and water is coming in the bottom of the gimble? what the heck is that. Then I head back to put it on the trailer and it won't go into neutral and I hit the dock seems when it's running it won't shift when hot whats that? Bad day for sure any help appreciated by the way there was a great looking skater and a ton of nice actions. thanks guys this is been a bummer. Rick

[vnemous]

could it possibly be coming in from the steering pin at the top of the gimple and look like the bottom?

[Tom Smyth]

Busted shift cable and torn bellows?

[delawarerick]

Shift cable is in tact it was replaced less than a year ago same as the bellows and the water was coming in around the 2 tubes that run through the bottom of the gimble. Would a shift interupter make it not pull out of gear? thanks Rick

[delawarerick]

It is leaking where the 2 tubes go thru at the bottom all the way down at the bottom of the gimbal housing. thanks Rick

[Dave Strong]

It is leaking where the 2 tubes go thru at the bottom all the way down at the bottom of the gimbal housing. thanks Rick

You talking the exhaust outlets?

Dave

[delawarerick]

No I have thru hull it is the bottom of the gimbal inside plate down under the gimbal looks like tubes or cables it is an old mr1 or early gen 1. thanks Rick

[Dave Strong]

No I have thru hull it is the bottom of the gimbal inside plate down under the gimbal looks like tubes or cables it is an old mr1 or early gen 1. thanks Rick

Any way you can take a pic?

Dave