Is the 3.0 litre offshore clamp and the 2.5 litre offshore clamp the same???

[mragu]

Thanks, Mike

[capteliminator]

All but the bottom yoke. Its the only 3.0 specific part.

[vnemous]

I have a 2.5 heavy duty clamp on my 300x
http://i260.photobucket.com/albums/ii3/vnemous/20130120_121230_zpsa4df10bc.jpeg (http://s260.photobucket.com/user/vnemous/media/20130120_121230_zpsa4df10bc.jpeg.html)

[1BadAction]

All but the bottom yoke. Its the only 3.0 specific part.
:iagree: It all bolts right up.

[mragu]

The only yoke I know is inside an egg:D. So can it be used or is there alteration involved?

[tux974]

Only change like mentioned is bottom yoke, no mods, exactly the same. Even the 400ROS motor has the same saddle.
Try to get the later saddle with poly glides.
https://scontent-lga3-1.xx.fbcdn.net/v/t1.0-9/12512485_1705968549618565_179953134371228732_n.jpg?oh=a81c615e2428b58aed7fddd5c39a2297&oe=57D0BF24

[1BadAction]

I had the bottom yoke and fat tiller arm from a 2.5 swapped on a 3L 3 ram mid that I had test fit up, ready to go to powdercoat, but after seeing a few of these 3 Litre swivel brackets busted to shiz I decided to build my mid on the Alcoa cast single ram stuff. That 3 ram crap belongs on bass boats and trash barges, IMO.

[mragu]

I am still not clear yet. What my question is, is I have a 300X offshore, single ram clamp. Can this be used on an 2.5 litre offshore mid? Thanks for your patience, Im getting old

[Mike Nass]

yes, as capeliminator said... its will work fine, but the bottom yoke will need to be changed to a 2.5 style, they are plentiful... the 300X has a wider bolt pattern on its yoke that the 2.5... you should be able to find one fairly easy... cheers