CUT heads

[TEXAS20225]

4 sets 34cc, 2 sets 33 cc,1 set 787 C2 un cut they got some corrosion on them it not bad though 1 set,789 c3 uncut im looking for 488 c4 and c5 late model no hail damage some of the 34 cc were 789 heads so they be 2.26 dia chambers (all you wishful thinkers) this means im trading one set of cut heads for one set of uncut ,un marked, none tweaked stock heads







ALL HEADS TRADED THANKS MIKE AND SCREAM AND FLY

[Deville]

Pm sent

[YELLOWSS]

Hey bobby, I have a few sets of 488 c5. I will go through them. Might be able to do some trading.
513-207-213one
thanks,
Roy

[TEXAS20225]

ok roy thats what im wanting to do trade for fishing motor heads

[YELLOWSS]

I have 2 sets of c5 heads. Another set that has has very minor damage. I Can clean it up if you want them. I Proly have more.

[TEXAS20225]

ok i have a set 787c2 and a set 789 c2 and some 488's , number are confusing on mercs heads different numbers sometimes have same diameter combustion chamber, i also have a set 789 c2 uncut and a set 787 c2 uncut the787c2 have a lil corrosion but not bad, i set 33 cc heads that are alodined cut flat on top i ran these on a steel sleeve 260 150lbs plus , ill trade all these for fishing motor stuff with no hail damage im thinking all of these heads are UNdamaged 7 sets in all i think

[merc old school]

I have a very clean set of #488-C 5 , 2.396 comp. chambers , I would like to trade if you still need a set , I can post pics. and I will help with shipping , let me know , thanks , Earl

[TEXAS20225]

yes i need them are they the late model heads with no ridges ?? most all these heads i have have not been run since they were cut some i ran we can trade if yours are unmarked up any where pm info

[merc old school]

pm me you cel. # and I will get my son to send you pics. of the heads tonight , no ridges and I do not think they have been cut , I can mic them at different points for you , thanks , Earl

[TEXAS20225]

anyone wanting to trade can send me pixs of the chamber side of the heads 8176751224 i want new model un marked heads C4 or C5

[TEXAS20225]

Roy you musta changed your mind

[merc old school]

I sent you pics. of my C5 heads , I of the pics. were of the chamber side , did you get it? I also give you the measurement of the chamber , if you call me on my cell I will measure any thing you want or resend pics. these heads seem to be the ones that you need , I can send these heads to you and you can check them out your self , if you don't like them , send them back , what else can I do ? thanks , Earl [ 1-757-672-3478 cell ]

[TEXAS20225]

NO PIXS of the chambers you sent two pixs one of casting number and the back of both heads no inside for some reason you dont want to show me the chamber sides of your heads i showed you mine both side both heads looks like that would be a guideline for you??? there is no benefit from measuring anything if they are C5 they will be 42 cc heads, send me your heads ill check them out if they are what you say ill send you mine ill pm my address

[bkwalk]

ok i have a set 787c2 and a set 789 c2 and some 488's , number are confusing on mercs heads different numbers sometimes have same diameter combustion chamber, i also have a set 789 c2 uncut and a set 787 c2 uncut the787c2 have a lil corrosion but not bad, i set 33 cc heads that are alodined cut flat on top i ran these on a steel sleeve 260 150lbs plus , ill trade all these for fishing motor stuff with no hail damage im thinking all of these heads are UNdamaged 7 sets in all i think

Do you mean you will trade all these heads for one set of 488 c4 and c5 late model no hail damage heads??? or fishing motor stuff? what do you want heads or fishing stuff?? be more specific please.

[TEXAS20225]

i cant be more specific im looking for consumer heads if that more understandable for you, and nobody would trade all these cut head for one set of stock heads i guess ive heard it all now:rolleyes: i build fishing motors, lots of them if that clue will help,also its says 'fishing motor stuff not fishing stuff:rolleyes:

[TEXAS20225]

old school im returning your heads they been hit with a drum sander this is not my idea of nice and clean, FedEx tracking number 776266252290 somebody gotta sign for these

[TEXAS20225]

let me post this again i have several sets of cut heads im trying to trade for uncut heads set for set not all i have for one set:rolleyes: no heads that have been tweaked on uncut unmarked set for set

[TEXAS20225]

All heads traded off thanks

[wrechin2]

What I missed out! All those heads and I would have given 2 sets of 488 C5 heads for all those cut heads!!

[TEXAS20225]

james i had a couple who thought that i was trading 7 sets unrun after machining cut heads for one set of heads go figure they never paid to have any cut :rolleyes:

[wrechin2]

I know what u mean....