need pics of trim actuator installation on a 300xs

[mistah_max]

trying to adapt a stainless marine actuator kit from a 20in offshore mid to my 20in 250xs mid. i'd need to see a pics of a actual stainless marine trim actuator kit installed on a 250-300xs to get a idea of how to modify what I have.

thanks!

[vnemous]

http://i260.photobucket.com/albums/ii3/vnemous/20130421_163902_zps62822a2e.jpeg (http://s260.photobucket.com/user/vnemous/media/20130421_163902_zps62822a2e.jpeg.html)

[vnemous]

sorry first pic was a single ram hd clamp. This is a bass clamp. You will have to view in on it to see better.

http://i260.photobucket.com/albums/ii3/vnemous/IMG_1314.jpg (http://s260.photobucket.com/user/vnemous/media/IMG_1314.jpg.html)

[mistah_max]

thanks! this is exactly what I have to work with! I think my clamp is different. theres no place to bolt that little bracket like in your pic. I've seen another kit on stailessmarine but cant seem to figure out how to mount or fabricate my bracket

here a pic.
http://i1060.photobucket.com/albums/t451/mistah_max/20160424_204243_zpsvtljlqzp.jpg (http://s1060.photobucket.com/user/mistah_max/media/20160424_204243_zpsvtljlqzp.jpg.html)

[mistah_max]

ok yeah I see ..what is the L shaped bracket bolted to??existing hole or you made some??

[vnemous]

On the bass clamp the roller is on a bar that attaches to the two nuts that have the wear plates for the two small rams. If your gonna try to do what is on the HD clamp, yes you have to drill holes in the swivel.

[vnemous]

I dont think you will be able to use that roller cause the tilt pin holes are lower on the bass mid and you cant clear them to attach to swivel.

[vnemous]

If you look at this pic you will see the bar, at the top of the bag, that Im talking about.

https://www.bing.com/images/search?q=stainless+marine+trim+indicator&view=detailv2&&id=ACCB29308109960ACA5C93A9471C1224325B55D4&selectedIndex=1&ccid=cZD53oCI&simid=608028281869501702&thid=OIP.M7190f9de8088de2362a861a484979adao0&ajaxhist=0

[mistah_max]

cool thanks! looks like i'll have to modify the mounting bracket as well so the cable comes in at a angle like yours.