PDA

View Full Version : Parting out twin 1987 225 Evinrude 2.7 Bridgeports



at100plus
10-23-2015, 07:10 PM
Make offers want this stuff to go to new homes.

Ebay listings: http://m.ebay.com/sch/i.html?isRefine=true&sid=hydrostream2.5

HEADS ARE SOLD



All electronics good. These were good running engines that ended up having underwater corrosion issues with the brackets and trim manifolds.

1 OEM Stator left

Power packs are good one new last year 4 more available. All are 6700 rpm. I think I have a 5500 RPM powerpack too. This is the two power pack style ignition.

2 crankshafts look to be in excellent condition.

VRO Tank

Vacuum Switch (2)

Intake manifold (2)

Throttle bodies (2)

Carb links (2) - the ones found at the top of the carbs that often have a play in the barrel where it pushes on the linkage.
Regulator

2 keyswitches and alarm buzzers (used one season bought new)

Spark advance levers

Electrical bracket olastic piece found at top rear where connecting panel resides

Top crank cap with good bearing (2)

Air Silencer cover (2)

Air silencer base (2)

at100plus
05-29-2016, 07:32 AM
Link to my ebay:

http://m.ebay.com/sch/i.html?sid=hydrostream2.5&_pgn=1&isRefine=true

at100plus
06-14-2016, 06:03 PM
Anyone want the cowls, free, want to clear out some space in my loft.

Tinbanger1979
06-20-2016, 02:48 PM
Hello, are the vro pumps the same as brp part number 5007420? If so, how much shipped to zip code 16117? Thanks, Paul

at100plus
06-21-2016, 09:15 AM
Hello, are the vro pumps the same as brp part number 5007420? If so, how much shipped to zip code 16117? Thanks, Paul

Pumps are sold

at100plus
06-22-2016, 08:56 PM
Accepting offers just make it worth my while to ship this stuff so it goes to a new home.

phil blomquist
06-23-2016, 10:20 AM
I could use a center main bearing cap and retainer. How much?

at100plus
06-23-2016, 11:03 AM
I could use a center main bearing cap and retainer. How much?

Top cap? Check ebay link. I have one. Make an offer thru ebay.

phil blomquist
06-24-2016, 09:13 AM
The center main bearings are on the crank in the center of the shaft. You have the upper pictured

at100plus
06-24-2016, 12:11 PM
The center main bearings are on the crank in the center of the shaft. You have the upper pictured

I'll pm you my #. Not sure what they are worth but I can separate them.