JL Amp Wiring Question

[hog wild]

Hey guys, I just bought a new reaction and am putting a new stereo in it. I ordered 2 sets (4 total) of MX770 speakers and an M400 amp. My question is in order to get full potential out of this combo I read that the speakers should be wired in series and the amp bridged. Any stereo guys out there that can point me in the right direction?
Thanks!

[idvette]

Don't bother. Wire each speaker to the amp's individual outputs. Job done, no issues. The speakers are 4 ohms, amp is designed to run at 4 ohms. No reason to over think it.

[johnmiffco]

when u wire in series and bridge u get 20 more watt amps pr channel
but when u run the amp bridged it now pull max amp draw at all times and gets amps hotter
I run 2 of the 400/4 s and it was sucking my battery down and the 1 bridged amp was 2 times hotter than the straight wired
I love the smaller sized amps and they are clear
as stated stay straight wired and thay will sip power when volume low

[pyro]

It's not going to make much difference.