Brand new Blemished HNR Carbon Fibre Short Drag Cowl -

[Mike Nass]

Brand new blemished HNR Carbon cowl, just under 6lbs... this is the short drag (1.5 shorted than stock, a bit narrower front and no rear side air intakes... fits stock pan... it somehow got hit in the side (or something) and ended up with some superficial cracking the right side... see second picture... totality usable cowl, real pretty, just cant sell as meeting my standards... $400, plus shipping! located in Vancouver Canada... e-mail me direct at [email protected] if you would like to buy it... cheers btw, i have everything available to make this a complete cowl...pan/decals/hardware, etc...

[Mike Nass]

SOLD, SOLD, SOLD... thanks guys!

[dbug10]

Mike are you still making these ? if so what would a stock height and width drag cowl go for in CF with the pan ? thanks a bunch James

[TripleA]

How much for one identical in fiberglass with pan?

[texasvector]

not sure if these are up to date but gives you idea.....im sure mike will clearify

[motorheadbishop]

Any other blemishes, let me know...

[Mike Nass]

e-mail me at [email protected] and i can send you full pricing and product info... we are reluctantly doing the odd HAND LAID carbon, not yet back to doing the infused carbon again, trying to find a source to come make me reusable infusion bladders as pleating the bags take at least 4 hours per cowl...


Mike are you still making these ? if so what would a stock height and width drag cowl go for in CF with the pan ? thanks a bunch James

[Mike Nass]

i have another complete short drag cowl, top to bottom, pan, baseplate, decals, merc hardware, etc. its perfect, except on the cowl, there was a couple spots where the gel did not gas off fully which results in a minor fogging in a few spots...... the clear gel is tricky to use, you have top spray several light coats allowing it to gas of each time... way less forgiving than a color... this just happens once in a while... would normally be almost $2000, would let it go for $1500 plus shipping...


Any other blemishes, let me know...

[patchesII]

Mike are you still making these ? if so what would a stock height and width drag cowl go for in CF with the pan ? thanks a bunch James

If you're gonna pull the trigger on a cowl I'd go with Mike's smaller one. I like it better than the stock cowl

Bishop, break that wad of money out of your pocket. 1500 ain't no step for a stepper