merc v6 2.5 cut heads

[TEXAS20225]

i got some heads cut by a man on this site they are good that im wanting to trade for some stock v6 heads preferably 488 C4 and C5 i know i got some 33 cc dont know what else, must be unmarked or just slight hail damage

[johnmiffco]

im fixin to have 3 sets of stock heads cut to 34cc
if u have some 34cc im interested in trade
don't want 33,,,,little too much for me on pump gas

[pennman]

i am getting ready to get some cut myself. i have a set off a 99' 200 i was going to cut. will check numbers when i get to shop this morning. they are perfect, hope they are the right number. may have other stuff to trade if they are not. thanx,mike

[Schramer]

I believe I have just what you need and my buddy (he is holding them now as he was going to cut them for me) is sending me pics of them in the a.m....pm me your # or email and I will send you some pics

[pennman]

Would like to stay in line here to see if what I have is what you want. Thanx, mike

[TEXAS20225]

i have not had a chance to recheck these heads i wont have any 34cc heads to trade off as i use those, i have 2 sets of 33 cc i know with the front cut flat and some others, maybe a 30cc set ive been real busy i try my best to scatter these out Monday and CC all of them ill let you guys know

[pennman]

Checked them they are 488 c4 heads. Thanx, mike

[Schramer]

Mine are 18789-C3....not sure what they are off of but I do believe they are 38cc so if you want pics let me know

[TEXAS20225]

i cc'ed a set of 789c3 today they were 35cc they did not look like they had been cut but they had been wiz wheeled so who know im thinking 789 C3 are 260 heads also these came on a 135 so they would be most likely 36CC i have another set of 419 C1 heads that are very small i did not cc im cuz they had big time hail damage i have 2 sets 33 , 1 set 30, these heads have not been run since cut i set 35, 1 set 35.5 , have not been run, and 2 sets 32 both got hail bumps on um so i wont trade these some of these heads been around here a few days :rolleyes: like i remember lol i also have one head unmarked a early style 260 that 28 cc and one Bridgeport head a15221 C2 36cc that missed the scrap haul somehow

[TEXAS20225]

I donot know what heads will produce compression wise it depends on different situations the last 225 i dropped on my bullet (on there now) was ported by James Perry and all new bores with Vertex pistons im running 34CC heads on it my compression is 145-148 on all holes but i know its been decked sum and a few other hammer/chisel marks put on it;)an sum hacksawin too!

[pennman]

Lets do the 35 ' if they are nice. Let's swap addresses via pm. Thanx, mike

[Schramer]

I would trade for a set of 33s if you like....send me some pics if you can and I have a couple pics on my phone if you want them

[TEXAS20225]

text me ill pm you my phone number and get some pixs to you tomorrow

[TEXAS20225]

Im looking for 488 C4 or C5 which are 38 and 42 cc

[johnmiffco]

I have an extra set od 488 C5 and 488 C2
heads im not going to be using
looks as they have never been milled ,,clean and undamaged
im lookin for some 187 I can cut to 34
lmk if want these C5 or 2

[TEXAS20225]

john the guy up at post number 12 has some 789 -3 heads he may trade for the c5

[johnmiffco]

have talked with him,,,and workin out a deal,,,tks
do u want these 4388 c5 I have,,,,,
make an offer as I don't need them,,,