135 carb options

[Mirage 659]

Will a set of WMV-4 from a '96 175 work on a 1990 135hp fat block 2.0, or will they be too much?

Thanx

jb

[wired247]

The WMV 4's had the same throat size as the WMV 2's in the '96 150/2.0 at 1.312". You may need to adjust jetting a bit. Use the '96 150 specs as a guideline and you won't be far off. The later 135's had the big bore WMV's too. You'll need to change linkage and the throttle cam too. The carbs open different ways.

https://www.dropbox.com/s/4yzzbo83job38t5/carbs.pdf?dl=0

I had the 1.312" bore WMV 2's on the 150 in my checkmate for a while and with 26 CC heads, 16 amp charging and a size up in jetting it would buzz right up to 7K .

[Mirage 659]

Wired;
thanks, that PDF is full of info
by the way I talked to the guy last night and its a '90 175 so Im thinking the linkage should be the same

[wired247]

If they are WMV 4's they aren't off a '90.

[Mirage 659]

yes I undeerstand, I looked up to see what was on a '96 model before I knew it was a '90

thanks

[roadkill636]

I have a set of wh41 ... $100

[TEXAS20225]

wh41 are what comes on a xr4 2.4 liter 150