PDA

View Full Version : (2) Mercury 2.5 200 Stock Complete Powerheads, Drop-On



computertamer
09-08-2014, 03:03 PM
SOLD Thanks!

They both ran fine when I pulled them about a year ago, early 90's engines, offshore models. I don't have access to a calibrated compression tester but my crappy gauge reads 105-110 psi on all cylinders across both engines.

I also have the mids and lowers and everything else if anyone is interested, including 4 trim/tilt units, 2 clamps with stainless steering arms and tilt tubes, and two Mach Stern-Driver Stainless props 14.5 x 22. They're from a project boat that I wasn't able to finish.

$1000ea for powerheads, $3000 For Everything.
305620
305621
305622
305623

computertamer
09-08-2014, 03:50 PM
Added pics.

computertamer
09-10-2014, 03:00 PM
Added compression #'s, sort of. All 12 cylinders are within 5 psi of each other but one gauge says 85-90 and the other says 105-110.

computertamer
09-11-2014, 08:33 AM
Here are a few close up pics. Not bad for saltwater engines.

305800
305801
305802
305803
305804

computertamer
09-13-2014, 10:05 AM
How about $2500 for both powerheads? They just need starter solenoids($25 ea), but I know whoever gets them will open them up and do surgery anyway!

computertamer
09-15-2014, 01:06 PM
The other merc stuff...

4 T/T units, 2 work and 2 might need motors
2 clamps with stainless steering arms and stainless tilt tubes
2 offshore cans 25", the bolt holes for the lower mounts are buggered up
2 Mach Stern-Driver stainless props 14.5 x 22


306043

306045
306046

computertamer
09-18-2014, 04:14 PM
Another Price drop! You know you're gonna need a stockpile of 2.5's!!

computertamer
09-26-2014, 06:27 AM
Lowers are gone.