PDA

View Full Version : Clevis joints, who has them?


kimswang
08-06-2014, 03:23 PM
Where can I find Clevis joints. It is for a steering system I am building. 5/8" hole, and 1/2" hole. Can't find it on the Latham site, can't find it on the IMCO site, and the Machine Marine guy refuse to sell me anything.
graynester
08-06-2014, 09:13 PM
send me a pic of the 1 u need I have 1 here.

B
transomstand
08-06-2014, 09:39 PM
http://www.mcmaster.com/#rod-ends/=t6469m
kimswang
08-06-2014, 11:18 PM
send me a pic of the 1 u need I have 1 here.

B
I need more than one, do you have that?
kimswang
08-06-2014, 11:31 PM
This is the one I need 4 of. If the rod end is male, no worries. The big bolt is a 5/8" and the fork bolt is 1/2". Perfectly the clevis would be an inch longer than this but let me know what you have and I'll see if I can work with it.

http://i1291.photobucket.com/albums/b542/Kim_Swang/Scarab%20Transom/photo_zps03c3ff71.jpg (http://s1291.photobucket.com/user/Kim_Swang/media/Scarab%20Transom/photo_zps03c3ff71.jpg.html)
NVRFASTENUFF
08-07-2014, 04:46 AM
I have one as well. I will measure it in the early afternoon for ya
V pads
08-10-2014, 08:04 AM
I had the same response from marine machine... I was/am after a Clevis as well and need the ram rebuilt. He only wanted to sell me a complete new ram and pin. Hopefully a local hydraulics shop can match the seals up. I would be interested in if you found an alternate Clevis.
kimswang
08-10-2014, 08:53 AM
I had the same response from marine machine... I was/am after a Clevis as well and need the ram rebuilt. He only wanted to sell me a complete new ram and pin. Hopefully a local hydraulics shop can match the seals up. I would be interested in if you found an alternate Clevis.


I plan to use the clevises for my tie rods. I might have to have them made, as I want the ability to trim/tilt all three engines independently. But will buy 4 regular ones and modify them if I can find them.
graynester
08-18-2014, 06:57 AM
does anyone have any clevis joinst hanging around i'm looking for 1 to match 1 of the 2 I have?

I have the the hynautics rams.

looking for the swivel pin also.

B
largecar91
08-18-2014, 09:44 AM
Call Speedway racing. It a round track supply. They have a lot of tie rods and clevis joints.