StrokerOMCSS
05-22-2014, 12:55 PM
I have the Yamaha Elctronics and Flywheel and Top Cap bearing and I also have 6 Yamaha coils and 6 Mercury CD I coils with 6 standard mercury plug wires and also 6 magancor plug wires for the merc coils. I also have modified reed plates and boseen reeds. I have the carbs that have been worked and a lot of air jets and primary jets. I even have the fuel pump and reg. Everything you need to do a bolt on change over. 1000 plus shipping obo.
Recap
All electronics
Flywheel
Top Cap bearing
Worked carbs
Modified reed blocks
Boseen reeds
6 yahama coils
6 merc coils
Merc plug wire
Magnacor plug wires
A lot of jetts
Fuel pump and reg.
2 fuel rails
I am going back to fuel injected nothing is wrong with these parts they work great. Well one carb has a chip on the side but does not hurt carb.
Recap
All electronics
Flywheel
Top Cap bearing
Worked carbs
Modified reed blocks
Boseen reeds
6 yahama coils
6 merc coils
Merc plug wire
Magnacor plug wires
A lot of jetts
Fuel pump and reg.
2 fuel rails
I am going back to fuel injected nothing is wrong with these parts they work great. Well one carb has a chip on the side but does not hurt carb.