PDA

View Full Version : what paint to use for flames



C-C
02-24-2003, 10:34 AM
i have a new mirage 1/4 master,, white gel coat.. what paint is best for flames and should i use a clear coat.. thanks cc

10.5' Tunnel
02-24-2003, 05:32 PM
Someone did an awesome flame job, and posted there progress on the forum. They could probably help you. Heres the link http://forums.screamandfly.com/forums/showthread.php?s=&threadid=26426&highlight=flames+paint

airide18
02-24-2003, 08:08 PM
Wildman is the paint expert on this site,he should be ablr to give you all the help you need.BUt if it were me i would flame with House of Colurs candys and pearls,and clear with PPG.

Travis Fulton
02-24-2003, 08:36 PM
i think a-lot of people are using HOUSE OF KOLOR !!!!!!! airide is correct wildman is the paint guru!!! this is what i used on my trailor and it looks great!! we used a sikkens clear!!:D ;)

A.Acosta
02-24-2003, 09:00 PM
Hi Chris
So you have a new proyect. Good luck. i always use for my custumers boats and my boats ppg.
Anthony

Travis Fulton
02-24-2003, 09:08 PM
anthony, thats a great lookin boat(and paint)!!! i am going to paint my omc white this year what color is omc using for that or is it just a bright white, i always thought it looked kinda milky???? :confused:

A.Acosta
02-24-2003, 09:20 PM
ppg

A.Acosta
02-24-2003, 09:27 PM
Travis
it is white
Anthony

lhovan49
02-26-2003, 09:51 PM
What kind of flames do you want , fad away traditional , commilian, not sure of spelling, am doing a set on my sons boat that are candy purple going to a burgandy,with some trible stuff on the deck, I am using ppg, every color that KOZ has can be had this way, and house of kolor will set you back a bunch. Case in point ,one of my bikes I use hok stuff cost little over $1200.00 , doing the kids boat with a white base for about $700.00, but to each his own, good luck and would lie to see when done

BOTTOMS UP SERVICE
02-27-2003, 05:57 AM
HOUSE OF KOLOR IS GOOD, GOOD AND EXPENSIVE. DIAMONT IS VERY EASY TO USE AND YOU CAN MASK FOR YOU NEXT COLOR IN 20 MIN. DIAMONT CLEAR IS THE BEST HIGH SOLIDS THERE IS . DONZI USES IT AND IT HOLDS UO TO ACID AND UNDER THE WATERLINE EXPOSURE. IT ALSO SANDS WITH 600 DRY AND POLISHES TO A PERFECT FINISH AFTER 2000 GRIT.

BILL:eek: